Free Simple And Accurate TREX Pitch Meter

1 - Print out both templates, make sure to print full size.
2 - Cut triangle (part a) out and cut out the blade part.
3 - Do not cut any of part b, just fold along lines along bottom then top then sides, tape to surface.
4 - Place TREX behind this squarish template and align flybar square with top of part b template. slide triangle part onto blade. use anything square to adjust triangle piece so the line running down is perfectly vertical... that is zero "0" degrees, now slide TREX into "position" so that triangle piece is lined up with "0" on the taped piece... adjust....



Download Trex Pitch Gauge Part "A" And "B" :-

0 comments: